欢迎访问上海佑孚贸易有限公司官网
tel:021-56830399    邮箱:qin@bestfluoro.com 联系

P229 Polylso Release-水性非凝胶聚异氰酸酯脱模剂


P229

P229 Polylso Release

Stoner® P229 PolyIso™ Release is an extremely cost effective concentrated silicone and water emulsion that has proven to easily release polymer concrete, centrifugal cast FRP, and male or female molded non gel coated polyester or epoxy based composites that do not require any post painting.

 

 

P229 PolyIso™ Release ADVANTAGES:

  • Environmentally friendly.  Non-flammable and No VOC.
  • Easily diluted with tap water.
  • Fast water evaporation.
  • Versatile release can be spray applied or hand wiped.
  • Minimal mold build up.
  • Outstanding releases, outperforms wax products.
  • Applied cost is significantly less than wax products.

Water based emulsion that can be further reduced with water, achieving very low application costs. Easiest release for non-gel coated products such as polymer concrete (pipe, utility boxes, manways), epoxy pipe, fittings, domes, tanks, etc.

P229

P229 Polylso Release

浓缩配方,离型聚异氰酸酯,可稀释配方消除边缘修剪的需要。非易燃。简单地侧板模具表面上塗上脫模劑,让部件快速轻松地脱模。防止黏著,你可稳定地造出更多高品质的部件。最好应用一層薄涂层。产品含有沉淀的材料。建议使用前和使用过程中搅拌。最好应用是通过使用喷雾系统施工,做出一層薄涂层。

水基乳液可以进一步降低水分,实现非常低的应用成本。 对于非凝胶涂层产品,如聚合物混凝土(管道,公用工程箱,人行通道),环氧树脂管,配件,圆顶,罐等)最容易脱模。

产品关键词:Teflon涂料|杜邦特氟龙涂料|XYLAN涂料|TUFRAM|STONER脱模剂|TRASYS水性脱模剂|滚塑脱模剂|硅胶脱模剂|聚氨酯PU脱模剂|热塑性塑料脱模剂|碳纤维脱模剂|胶管脱模剂|复合材料脱模剂|半钢轮胎涂料|球模铁氟龙涂料|鞋模铁氟龙涂料|园林剪刀铁氟龙涂料|吸塑模铁氟龙涂料|医疗器械涂层|橡胶表面特氟龙喷涂|O型圈PTFE喷涂|耐磨自润滑涂料|二硫化钼涂料|轴瓦涂料|真空泵无油转子涂料|灯泡防爆PFA粉末TraSys818|TraSys420|TraSys9825|TraSys428|TraSys423|电子清洗剂\3M PFA静电喷涂级粉末|Whitford PFA喷涂粉末

版权信息
一级a啪啪啪视频在线观看免费,啪啪男女视频免费观看,天天啪久久热